Prerequisite

Download EVE-NG Client Pack (Putty & VNC will not work if not downloaded)

Windows : https://www.eve-ng.net/index.php/download/#DL-WIN
MAC  : https://www.eve-ng.net/index.php/download/#DL-OSX
Linux : https://www.eve-ng.net/index.php/download/#DL-LIN

STEP 1:

1. Go to the browser and enter https://clc.openvpn.com (use in incognito mode) 

2. Download the suitable VPN Client

3. Once Downloading is done, Install the VPN Client

4. Enter your username & password

5. After login select the nearest location your country

6. After performing all steps, you will see below screen, and after that you will be able to access our Racks.

STEP 2:

STEP 3:

Steps for reverting Eve-ng Lab

1. Login the Eve-ng Lab with Cred

2. After Login Click on -> More Action -> Wipe all Nodes (WAIT TILL ALL DEVICES GET SHUTDOWN)

Start devices as per section (DO NOT START ALL DEVICES)

3. If any device is not coming up on console, so please wipe that device again.

STEP 4:

Steps for reverting Cisco DNAC

1. Login the ESXi Host with Cred

2. Select DNAC VM -> Action -> Snapshots -> Manage Snapshots

3. Click on Initial -> Restore Snapshot (it will get power off)

4. Close it then power on DNAC VM (Verify as per below Diagram )

NOTE:  DNAC takes 30 minutes to come up after reverting.

After Login to DNAC if it ask for setup do exit the one time setup as it is already done.

STEP 5:

ISE login from End-Host: "CLC-ACCESS-GUI"

CLI / GUI : https://10.2.252.11 ( Rack1) [ admin / CCIEInfr4 ]

CLI / GUI  : https://10.2.252.12 (Rack2) [ admin / CCIEInfr4 ]

CLI / GUI : https://10.2.252.13 ( Rack3) [ - / - ]

CLI / GUI  : https://10.2.252.14 (Rack4) [ - / -  ] (Coming soon)

Verification of ISE application server services from ISE console

If Application server is not running ,then you have to wait minimum 10 - 15 minuets 
Even after waiting 10-15 minutes if ise is not fully started then wipe and start again
wait 10 - 15 minutes

Application server (ISE) may take 10 min to show in running

Now check reachability of ISE & DNAC from SW211

On Rack1

On Rack2

On DNAC verification

Note: Please open DNAC

On ISE

Now Open ISE from End-Host: "CLC-ACCESS-GUI"

Note: Incase if shows pending then follow below steps.

In case if you see incompatible issue with DNAC & ISE, just revert DNAC snapshot again.

Prerequisite

Download EVE-NG Client Pack (Putty & VNC will not work if not downloaded)

Windows : https://www.eve-ng.net/index.php/download/#DL-WIN
MAC  : https://www.eve-ng.net/index.php/download/#DL-OSX
Linux : https://www.eve-ng.net/index.php/download/#DL-LIN

Read All Question First and Map it with topology.

1. Do not Power ON all devices follow the procedure as per this guide. If LAB responses get slow or LAB get corrupt then your WHOLE session get Terminated. Because LAB node IMAGES are very heavy in LAB v6.1 .
2. Make sure ASA1-2 are in Multi Mode and ASA3-4 in Single Mode. 
3. All devices and switches console connection is up and running specially ISE, DNAC, FireAMP, ASA & Stealth watch. ( check as per Section) 
4. Make Following changes and verification on ISE in starting as it will take around 20-30 minutes. 
5. Ping all next hops IP’s.
6. Check EIGRP & OSPF neighborship on routers/switches wherever configured. 
7. All ASA’s are blank, you’ve to start from scratch. 
8. In Exam cisco used cisco.com as a domain name, but in clc lab it is clc.local 
9. Accessing WSA, use MS Edge . 
10. Access other URL, use MS Edge installed on Management PC 
11. All router’s interfaces you’ll have to no shutdown.
12. Wipe the device & start as per Section required.

CLC recommended to complete Section2 first & then start Section1, as Section1 is completely depend on connectivity, which depends on Section2.

STEP 1:

1. Go to the browser and enter https://clc.openvpn.com (use in incognito mode) 

2. Download the suitable VPN Client

3. Once Downloading is done, Install the VPN Client

4. Enter your username & password

5. After login select the nearest location your country

6. After performing all steps, you will see below screen, and after that you will be able to access our Racks.

STEP 2:

DNAC REVERT

STEP 3:

Steps for reverting Eve-ng Lab

1. Login the Eve-ng Lab with Cred

2. After Login Click on -> More Action -> Wipe all Nodes (WAIT TILL ALL DEVICES GET SHUTDOWN)

Start devices as per section (DO NOT START ALL DEVICES)

3. If any device is not coming up on console, so please wipe that device again.

Verify all devices are come up on console.

1. GUI Devices

• ISE
• FMC NGIPS
• IPS
• WSA
• ESA
• FireAMP Cloud
• FMC FTD
• FTD1 & 2
• SMC
• FC
• NGIPS

2. All Router & Switches.

3. Windows Systems

• AD-DNS
• Management PC
• Sales PC
• Finance PC
• Marketing PC
• Engineering PC
• TAC PC
• QA PC
• Contractor PC

NOTE : All Routers interfaces you’ll have to no shut might be they will be in  shutdown 

STEP 4:

Steps for reverting Cisco DNAC

1. Login the ESXi Host with Cred

2. Select DNAC VM -> Action -> Snapshots -> Manage Snapshots

3. Click on Initial -> Restore Snapshot (it will get power off)

4. Close it then power on DNAC VM (Verify as per below Diagram )

NOTE:  DNAC takes 30 minutes to come up after reverting.

After Login to DNAC if it ask for setup do exit the one time setup as it is already done.

Device Login details

Step 2: Select Your Rack Switches

Step 3: Copy paste Device Name for login

Step 4:  Login with switch credentials (admin/cisco)

Prerequisite

Download EVE-NG Client Pack (Putty & VNC will not work if not downloaded)

Windows : https://www.eve-ng.net/index.php/download/#DL-WIN
MAC  : https://www.eve-ng.net/index.php/download/#DL-OSX
Linux : https://www.eve-ng.net/index.php/download/#DL-LIN

STEP 1:

1. Go to the browser and enter https://clc.openvpn.com (use in incognito mode) 

2. Download the suitable VPN Client

3. Once Downloading is done, Install the VPN Client

4. Enter your username & password

5. After login select the nearest location your country

6. After performing all steps, you will see below screen, and after that you will be able to access our Racks.

STEP 2:

STEP 3:

Steps 3.1: Revert EVE-NG LAB

Login to https://dnr1.ppm.example.com with the credentials given in step 2.

Now click as per given in below images

Steps 3.2: Revert APIC

Once done Restore APIC will come to initial stage. (No need to power on APIC)

Once Reverting rack is complete right Click and Start the Devices as per Task

Make Sure CLC-LAN Device is up otherwise you will not be able to RDP or SSH

NOTE: Once you finish all steps you can now login and practice

You can RDP CWS Machine from your Windows/ MAC

Prerequisite:

Download EVE-NG Client Pack (Putty & VNC will not work if not downloaded)

Windows : https://www.eve-ng.net/index.php/download/#DL-WIN
MAC  : https://www.eve-ng.net/index.php/download/#DL-OSX
Linux : https://www.eve-ng.net/index.php/download/#DL-LIN

STEP 1:

1. Go to the browser and enter https://clc.openvpn.com (use in incognito mode) 

2. Download the suitable VPN Client

3. Once Downloading is done, Install the VPN Client

4. Enter your username & password

5. After login select the nearest location your country

6. After performing all steps, you will see below screen, and after that you will be able to access our Racks.

STEP 2:

Device Credentials
 

STEP 3:

Steps for reverting Eve-ng Lab

Login to the Eve-ng Lab with credentials.

After Login Click on -> More Action -> Wipe all Nodes (WAIT TILL ALL DEVICES GET WIPE)

Start devices as per section (DO NOT START ALL DEVICES)

If any device misbehaves or does not start properly, then wipe and start the device again.

IOS-XR devices takes minimum 10 minutes for full booting.